Spend $10 and Enjoy Free Shipping

{"id":10650935940,"title":"McNett Aquaseal Repair Adhesive And Sealant","handle":"mcnett-aquaseal-repair-adhesive-and-sealant","description":"\u003cul\u003e \u003cli\u003eUrethane repair adhesive and seam sealer\u003c\/li\u003e\n\u003cli\u003eIndustry standard for maximum strength\u003c\/li\u003e\n\u003cli\u003eSafe on natural and synthetic fabrics\u003c\/li\u003e\n\u003cli\u003eHigh flexibility, adhesion, and waterproofing\u003c\/li\u003e\n\u003cli\u003eDries clear and is moisture cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the dictionary, under wetsuit repairs, it probably says “See McNett.” This is the industry standard for maximum strength repair to wetsuits, dry suits, gloves, booties – wherever there’s some neoprene to be fixed, a dive to be salvaged, you’ll find McNett\u003cbr\u003e\u003cbr\u003eThis is for 1 x 3\/4 oz (21g) tube\u003cbr\u003e\u003cbr\u003eThe industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240.\u003cbr\u003e \u003cbr\u003eWhat is it? \u003cbr\u003e \u003cbr\u003e\u003cbr\u003e    When cured (dry) Aquaseal is a thick, clear, elastic urethane rubber.\u003cbr\u003e\u003cbr\u003eHow it works? –\u003cbr\u003e\u003cbr\u003e    Aquaseal is applied to a hole or tear and allowed to cure over a period of hours (usually 8-12).\u003cbr\u003e\u003cbr\u003e    When applied, Aquaseal cures by reacting with humidity in the air. It doesn’t ‘dry’ the way other glues do. It changes from a thick liquid to a thick, flexible, elastic rubber.\u003cbr\u003e\u003cbr\u003e    Once cured, it’s permanent. The repair will generally last the life of the item.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDIRECTIONS FOR Neoprene REPAIR:\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eClean damaged area with Cotol-240™ Cure Accelerator\/Precleaner or solvent (paint thinner, nail polish remover or similar).\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eTrim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.\u003cbr\u003e\u003cbr\u003eMost repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eHOLES AND TEARS: Create backing with removable tape. Fill void and 1\/4\" beyond edge with Aquaseal. Remove tape after full cure.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eSEAMS: Apply 1\/16\" thick bead overlapping seams edges by at least 1\/4\". Apply with slight pressure to saturate fabric surfaces.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eHIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1\/2 hour after applying.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSTORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.\u003c\/p\u003e","published_at":"2017-05-03T12:06:12-07:00","created_at":"2017-05-03T12:06:14-07:00","vendor":"McNett","type":"Suit Care","tags":["Filter Brand_McNett","Filter Suit Care Products_Maintenance \/ Repair","Suit Care","Watersports","Wetsuits \/ Drysuits"],"price":698,"price_min":698,"price_max":698,"available":true,"price_varies":false,"compare_at_price":698,"compare_at_price_min":698,"compare_at_price_max":698,"compare_at_price_varies":false,"variants":[{"id":39827011780,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SV-MC-10114","requires_shipping":true,"taxable":true,"featured_image":{"id":25347452548,"product_id":10650935940,"position":1,"created_at":"2017-05-03T12:06:14-07:00","updated_at":"2017-05-03T12:06:14-07:00","width":1500,"height":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1955\/1231\/products\/sv-mc-10114_1.jpg?v=1493838374","variant_ids":[39827011780]},"available":true,"name":"McNett Aquaseal Repair Adhesive And Sealant","public_title":null,"options":["Default Title"],"price":698,"weight":36,"compare_at_price":698,"inventory_quantity":57,"inventory_management":"shopify","inventory_policy":"deny","barcode":"21563101140"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1955\/1231\/products\/sv-mc-10114_1.jpg?v=1493838374","\/\/cdn.shopify.com\/s\/files\/1\/1955\/1231\/products\/seavenger_sv-mc11114_f1_de7b991c-134f-47c2-b4bc-91d2a73ab79e.jpg?v=1493858329","\/\/cdn.shopify.com\/s\/files\/1\/1955\/1231\/products\/seavenger_sv-mc11114_f2.jpg?v=1493858329","\/\/cdn.shopify.com\/s\/files\/1\/1955\/1231\/products\/seavenger_sv-mc11114_f4_f120c3b5-b6af-4192-a2b5-821ef541201f.jpg?v=1493858329"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1955\/1231\/products\/sv-mc-10114_1.jpg?v=1493838374","options":["Title"],"content":"\u003cul\u003e \u003cli\u003eUrethane repair adhesive and seam sealer\u003c\/li\u003e\n\u003cli\u003eIndustry standard for maximum strength\u003c\/li\u003e\n\u003cli\u003eSafe on natural and synthetic fabrics\u003c\/li\u003e\n\u003cli\u003eHigh flexibility, adhesion, and waterproofing\u003c\/li\u003e\n\u003cli\u003eDries clear and is moisture cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn the dictionary, under wetsuit repairs, it probably says “See McNett.” This is the industry standard for maximum strength repair to wetsuits, dry suits, gloves, booties – wherever there’s some neoprene to be fixed, a dive to be salvaged, you’ll find McNett\u003cbr\u003e\u003cbr\u003eThis is for 1 x 3\/4 oz (21g) tube\u003cbr\u003e\u003cbr\u003eThe industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240.\u003cbr\u003e \u003cbr\u003eWhat is it? \u003cbr\u003e \u003cbr\u003e\u003cbr\u003e    When cured (dry) Aquaseal is a thick, clear, elastic urethane rubber.\u003cbr\u003e\u003cbr\u003eHow it works? –\u003cbr\u003e\u003cbr\u003e    Aquaseal is applied to a hole or tear and allowed to cure over a period of hours (usually 8-12).\u003cbr\u003e\u003cbr\u003e    When applied, Aquaseal cures by reacting with humidity in the air. It doesn’t ‘dry’ the way other glues do. It changes from a thick liquid to a thick, flexible, elastic rubber.\u003cbr\u003e\u003cbr\u003e    Once cured, it’s permanent. The repair will generally last the life of the item.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDIRECTIONS FOR Neoprene REPAIR:\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eClean damaged area with Cotol-240™ Cure Accelerator\/Precleaner or solvent (paint thinner, nail polish remover or similar).\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eTrim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.\u003cbr\u003e\u003cbr\u003eMost repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eHOLES AND TEARS: Create backing with removable tape. Fill void and 1\/4\" beyond edge with Aquaseal. Remove tape after full cure.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eSEAMS: Apply 1\/16\" thick bead overlapping seams edges by at least 1\/4\". Apply with slight pressure to saturate fabric surfaces.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003eHIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eWARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1\/2 hour after applying.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSTORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.\u003c\/p\u003e"}

McNett Aquaseal Repair Adhesive And Sealant

Product Info
Sku: SV-MC-10114
Vendor: McNett
$6.98
Maximum quantity available reached.
  • Urethane repair adhesive and seam sealer
  • Industry standard for maximum strength
  • Safe on natural and synthetic fabrics
  • High flexibility, adhesion, and waterproofing
  • Dries clear and is moisture cured

In the dictionary, under wetsuit repairs, it probably says “See McNett.” This is the industry standard for maximum strength repair to wetsuits, dry suits, gloves, booties – wherever there’s some neoprene to be fixed, a dive to be salvaged, you’ll find McNett

This is for 1 x 3/4 oz (21g) tube

The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240.
 
What is it?
 

    When cured (dry) Aquaseal is a thick, clear, elastic urethane rubber.

How it works? –

    Aquaseal is applied to a hole or tear and allowed to cure over a period of hours (usually 8-12).

    When applied, Aquaseal cures by reacting with humidity in the air. It doesn’t ‘dry’ the way other glues do. It changes from a thick liquid to a thick, flexible, elastic rubber.

    Once cured, it’s permanent. The repair will generally last the life of the item.


DIRECTIONS FOR Neoprene REPAIR:
 

Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar).

 
Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.

Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.


HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Aquaseal. Remove tape after full cure.

 
SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces.

 
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.


WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying.


CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.


STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.

Product Classification
Brand
McNett
 
 
Suit Care Products
Maintenance / Repair

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question

Recently Viewed Items