Aquaseal Tube and Cotol 240 Combo Pack
In the dictionary, under wetsuit repairs, it probably says “See McNett.” This is the industry standard for maximum strength repair to wetsuits, dry suits, gloves, booties – wherever there’s some neoprene to be fixed, a dive to be salvaged, you’ll find McNett. This is a handy kit with everything you need in one handy combo pack.
The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For fast cure, use with Cotol-240.
What is it? –
When cured (dry) Aquaseal is a thick, clear, elastic urethane rubber.
How it works? –
Aquaseal is applied to a hole or tear and allowed to cure over a period of hours (usually 8-12).
When applied, Aquaseal cures by reacting with humidity in the air. It doesn’t ‘dry’ the way other glues do. It changes from a thick liquid to a thick, flexible, elastic rubber.
Once cured, it’s permanent. The repair will generally last the life of the item.
DIRECTIONS FOR Neoprene REPAIR:
Clean damaged area with Cotol-240™ Cure Accelerator/Precleaner or solvent (paint thinner, nail polish remover or similar).
Trim loose threads. Non-fabric surfaces should be roughened with sandpaper, then cleaned. Apply Aquaseal® to surfaces directly from tube or with knife or flat stick. Keep repair level overnight. Avoid contact with other surfaces.
Most repairs reach full strength overnight (10-14 hours). Allow longer for thickest repairs. For fastest cure (2 hours or less), mix in Cotol-240.
HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Aquaseal. Remove tape after full cure.
SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces.
HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance.
WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying.
CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.
STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.